Wood Stain Hardened In Can. Usually, it is an old opened can of stain that goes bad. Here is a systematic procedure to go about it correctly:
Use bloxygen to help remove excess. Staining on a small piece of the deck, not even larger than a square. Once the stain dried, i sanded off the thick chunks.
Here Is A Systematic Procedure To Go About It Correctly:
Usually, it is an old opened can of stain that goes bad. Decant the amount of stain you'll need into a foil covered bowl and reseal your can right away. Last week i wanted to do some touch up.
So Instead, Use Gel Stain Over Wood Hardener.
Under a quarter of the can left. I add solvent to the stain and vigorously stir. I brushed a second coat, just as i did the first.
Wood Hardeners Are Made From Acrylic Resins.
A deep base is essential when applying dark stains to lighter wood. Use a clean cloth to wipe clean the outer rim of the can. Gently screw the lid over the top till it’s tightly sealed.
My Goal Is To Activate Any Of The Remaining.
Use bloxygen to help remove excess. This is because woodworkers might not seal the stain cans properly, allowing air, moisture, and bacteria to enter and render the stain useless. Be sure to really clean the chime and the lid of the can to assure a tight seal.
Many Wood Stains Can Last For Decades If They Are Stored Under Proper Storage Conditions.
When i finished staining my deck in june i had a little. Every minute the can is open the stain is curing. If you apply penetrating wood stain over wood hardener saturated wood, you’ll end up with blotchy looking stain color.