How To Sublimation On Wood. Another popular diy wood sublimation method is to coat your wood with a layer of polycrylic. In summary, to sublimate on wood, do the following:
At last, set the heat press at 350˚ to 400˚ temperature, and the time is 60 to 90 seconds (it depends on which wood type you are using); Apply a thin layer of polycrylic to the surface. Cut the lamination paper to the size of the wood substrate and place it on top, apply heat and pressure by using a heat press.
(Recommended Temperature 370 Degrees For 90 Seconds) Place The Printed Sublimation Paper On Top Of The Lamination Wood Facing Down.
Make sure to keep the sublimation paper upside when you start pressing. Add each of the letters to a sublimation print and tape down well. You can use the same protective paper as you did for the laminating portion.
Put The Entire Thing Inside Of Protective Paper And Press At 375 For 90 Seconds.
Apply a thin layer of polycrylic to the surface. Prepare the wood for sublimation by sanding it. This method will leave you with no residue and vibrant results every time.
Another Popular Diy Wood Sublimation Method Is To Coat Your Wood With A Layer Of Polycrylic.
In today's video, i show you how to sublimate on wood using polycrylic! Trim the transfer paper to fit the size of the wood you want to print on. It leaves a clear protective finish on wood and is easy to apply.
Cut The Lamination Paper To The Size Of The Wood Substrate And Place It On Top, Apply Heat And Pressure By Using A Heat Press.
Place the wood under the heat press sandwiched between two sheets of. At last, set the heat press at 350˚ to 400˚ temperature, and the time is 60 to 90 seconds (it depends on which wood type you are using); In summary, to sublimate on wood, do the following: